ProStar^TM PF Series Data Sheet 

Polypropylene, needle punched, roll media for pressure filters and other liquid filtration applications.
 

100% polypropylene construction Standard weights -- 15 and 18 oz/yd2(others available) Precut widths Fabricated to optimize filter press performance Precise surface finish Approaching a century of filter media experience Scrim supported

 

Features	Benefits
100% polypropylene	Broad chemical compatibility
Fabricated at an AFFCO specialty filtration media mill	Media fabrication optimized to match the application
Available in the weights and widths you need	Ready-to-use, cost effective configurations
Consistent media fabrication	High assurance of end-product quality
Scrim supported	Maximum strength

 

Specifications:

Materials of construction:  Fibers — polypropylene staple Scrim — polypropylene, 2.4 oz/yd2 ± 5%

Surface finish:  Eggshell (glazed) on both sides

Operating limitations:  To 200° F Use only in chemically compatible environments

Standard basis weights: (custom weights are available)  15 and 18 oz/yd2 ± 1 oz/yd2

Standard widths: (custom widths are available to 96")  96, 78, 64, 58, 52, 44, 38, and 32 inches

Permeability (per ft2 @ ½" w.g.):  15 oz/yd2 — 1-10 cfm 18 oz/ys2 — 1-3 cfm

Thickness:  15 oz/yd2 -- 0.055 ± 0.010 18 ox/yd2 -- 0.065 ± 0.010

 

How to order:
67PO	15	EBS	32
	Basis Weight  15=15 oz/yd2  18=18 oz/yd2	Surface Finish  EBS=Eggshell (glazed) on both sides	Width  32=32"  38=38"  44=44"  52=52"  58=58"  64=64"  78=78"  96=96"

Filter press drawing courtesy of EIMCO Process Equipment Co.

Properties and applications -- ProStar filter press media

Effective 2001. (C) 2001 All rights reserved.